Investigating the ratio of modular housing design and formwork method

Document Type : Original/Research Article

Authors

1 Master of Architecture, Faculty of Architecture and Urban Planning, University of Arts, Tehran, Iran

2 Associate Professor, Department of Architecture, Faculty of Architecture and Urban Planning, University of Arts, Tehran, Iran

Abstract

After industrial urbanization grew significantly, and the subsequent increase in population in large cities led to easy and economical construction. The resources in exchange for the quality obtained in this matter made the construction of these buildings unjustifiable both economically and environmentally. For this reason, modularity was considered in the design of residential complexes. Also, the use of modular construction methods such as prefabrication and industrial construction became possible in order to greatly improve the construction in terms of quality, management, and speed of construction. The use of industrialization along with modular design has been chosen in the field of designing and constructing residential complexes to eliminate many areas. In our country, the increasing need for housing and the impact of global housing project developments have been exploited with modular design and construction, but in the meantime, less attention is paid to examining the types of modulars together and also the relationship between the formwork and the formation of modular design. This research has examined the types of modulation and formwork methods by examining case studies, so that appropriate methods can be proposed for designing a modular residential complex and selecting formwork. As a result, a modular design requires a modular structural tool and a modular structure system consisting of formwork modules for optimal implementation.

Keywords

Main Subjects

References

  1. ارفعی, م. ن.(1382). ضوابط طراحی معماری براساس اصل انطباق شبکه‌های مدولار در سیستم‌های تولید ساختمان. تهران: مرکز تحقیقات مسکن، راه و شهرسازی.

    آصفی, م. (1389). تکنولوژی طراحی و ساخت سازه های صنعتی و مدولار. دانشگاه هنر اسلامی تبریز.

    امیری, و. (1398). به کارگیری رویکرد پارامتریک در متره و برآورد پروژه با استفاده از مدل سازی اطلاعات ساختمان. دومین کنفرانس بین المللی مدل‌سازی اطلاعات ساختمان.

    اولیا, ج. (1363). هماهنگی مدولار، ظوابط هماهنگی مدولار برای کشور ایران. نشریه شماره 56 مرکز تحقیقات ساختمان و مسکن.

    پرتال جامع اطلاع رسانی و ارتباطی شورایاری محلات منطقه5 تهران

    صفا، ح .(1394) .جایگاه مدوالر و پیش‌ساختگی در معماری مدرن. پنجمین کنفرانس ملی توسعه پایدار در                 علوم جغرافیا و برنامهریزی، معماری و شهرسازی. تهران: مرکز راهکارهای دستیابی به توسعه پایدار.

    عشری, م. ط. (1396). بررسی و تحلیل مزایا و معایب انواع قالب متداول و ارزیابی و انتخاب روش قالب بندی. چهارمین کنفرانس ملی مدیریت ساخت و پروژه.

    یگانه, م. م. (1389). انواع صنعتی سازی به روش قاب تونلی. واحد تحقیق و توسعه شرکت سرمایه گذاری مسکن

     

    1. Hyun, C. J. (2018). Automated optimization of formwork design through spatial analysis in building information modeling. Automation in Construction, vol. 95, pp. 193-205, 2018/11/01/.
    2. Veenendaal, M. W. (2011). History and overview of fabric formwork: using fabrics for concrete casting. Structural Concrete, vol. 12, no. 3, pp. 164-177.
    3. Brózda, a. J. (2019). Safety of Formworks in the Engineering and General Construction Sector. System Safety: Human-Technical Facility-Environment, vol. 1, no. 1, pp. 284-290.
    4. R. Peurifoy, a. D. (2011). Formwork for Concrete Structures 4th edition. The McGraw-Hill Companies.

    Li, W. L. (2022). A review of formwork systems for modern concrete construction. In Structures (Vol. 38, pp. 52-63). Elsevier.

    1. Shazwan Ahmad Shah, N. M. (2019). A review on wooden formwork for concrete casting,. IOP Conference Series: Materials Science and Engineering, vol. 513, pp. 012036, 2019/04/25.

    Murman, A. (2023, Oct 10). Solhagaparken Residential Complex. Retrieved from ArchDaily: <https://www.archdaily.com/1008010/solhagaparken-murman-arkitekter> ISSN 0719-8884

    1. Ruffray, M. B. (2010). Complex architectural elements from HPFRC and 3D printed sandstone.

    Nurdiani, N. K. (2021). The application of modular architecture on apartment buildings. In IOP Conference Series: Earth and Environmental Science (Vol. 794, No. 1, p. 012169). IOP Publishing.

    1. Arumsari, a. C. (2020). Cost and time analysis on the selection of formwork installation method. E&ES, vol. 426, no. 1, pp. 012042.

    Pibal, S. S. (2022). Framework of an algorithm-aided BIM approach for modular residential building information models. International Journal of Architectural Computing, 20(4), 777-800.

    1. Yip, a. C. (2008). Comparison of timber and metal formwork systems. Proceedings of the Institution of Civil Engineers - Waste and Resource Management, vol. 161, no. 1, pp. 29-36.

    Sabo, W. (2008). Legal guide to AIA documents (No. 1). Wolters Kluwer.

    Schipper, H. (2015). Double-curved precast concrete elements: Research into technical viability of the flexible mould method.

    Staib, G. D. (2008). Components and systems: modular construction-design, structure, new technologies. DE GRUYTER.

    Strickland, M. H. (2010). Roman building materials, construction methods, and architecture: The identity of an empire. Dissertations & Theses - Gradworks.

    Succar, B. (2009). Building information modelling framework: A research and delivery foundation for industry stakeholders. Automation in construction, 18(3), 357-375.

    T2.a, A. (2020, Nov 20). Danubio Budapest Building. Retrieved from ArchDaily: <https://www.archdaily.com/1003582/danubio-budapest-building-t-architects> ISSN 0719-8884

    Young, B. E.-K. (2020). Modular construction innovation in the UK: The case of residential buildings. In The 10th Annual Industrial Engineering and Operations Management (IEOM) Conference. IEOM Society.

Andišnāme-ye Me’māri
Volume 3, Issue 5
August 2023
Pages 72-90

Files

History

  • Receive Date: 20 September 2024
  • Revise Date: 21 December 2024
  • Accept Date: 01 January 2025

Share

How to cite

Statistics